Insta360 GO 2 Lens Protection Mirror Magnetic Suction Lanyard Simple Clip Steering Bracket Storage Package Original Accessories

R234.51R3,053.24

  • Lens protection
  • Magnetic lanyard
  • Simple clip
  • Steering support bracket
  • Storage bag
  • Conversion frame package
  • Steering bracket pet bagging
  • ND reducer
  • USB adapter enclosure
  • Diving shell
  • Charging case
  • Charging case protector
Clear
Compare
SKU: 13631 Categories: ,

Model number :GO2-BHJ-360

Insta360 GO 2 Lens Protector

What's included: 2x GO 2 lens protector

Screw type design to prevent accidental shedding

Anti – fog anti – fouling transparent coating process to ensure picture quality

 

Caution

(1) Before use, please ensure that the lens protector waterproof rubber ring, the periphery of the camera lens and its surface is clean and dry. Ensure that the lens protector is installed only in a clean, dry environment. If there are foreign objects stuck in the lens or lens protection lens surface, it will affect the camera shooting effect.

(2) Before use, please ensure that the lens protection lens has been completely screwed, otherwise the camera is not waterproof, the shooting effect will also be affected.

Insta360 Shadowstone GO 2

Lens protection lens

Screw-on design to prevent accidental dislodgement.

Anti-fog and anti-fouling light transmission coating process to protect the image quality.

image.png

主图02
主图03
主图04

How to replace the lens protection lens:

image.png

                Counterclockwise disassembly                                          Turn clockwise to tighten

Insta360 GO 2 magnetic lanyard

 

Note: All GO2s include 1x magnetic lanyard. You can purchase additional magnetic lanyards here.



Insta360 Shadowstone GO 2

Magnetic lanyard

Free your hands

image.png

Caution

1. Do not use the magnetic lanyard under the scene of strenuous exercise

2. Please do not use the magnetic lanyard if you are wearing a pacemaker because of the built-in magnet.



主图02
主图03
Insta360 GO 2 Easy Clip

image.png

                                Angle adjustable                                                 Quick disassembly

undefined
undefined

Insta360 GO 2 steering bracket

 image.png

                    Install anywhere                                           Seamless scene switching, handheld random camera

undefined
undefined
undefined

Insta360 GO 2 storage bag

It is light and portable for daily travel shooting, providing better protection for the camera.

Includes 1x storage bag for Insta360 Shadowstone GO 2.

image.png

Special for precision mold opening GO2

Prevent camera and accessories from colliding with each other

image.png

Interior mesh pocket design

Charging wire, magnetic cord and other objects can be put

image.png

Small, exquisite and durable

More comfortable for outdoor travel shooting

image.png

Size: 210mm * 120mm * 55mm

Color: grey

Surface: EVA mounted cloth

Insta360 GO 2 Adapter Kit

Three in one motion, magnetic suction and steering, suitable for different shooting scenes.

Support self timer rod with 1/4 stud, tripod and other sports accessories.

Two kinds of fixed bases can support curved and straight installation.

image.png

image.png

         1x motion adapter frame, 1x magnetic adapter frame, 1x steering adapter frame, 2x 1/4 screw fixing rod

image.png

       1x straight fixed base, 1x curved fixed base, 2x3M sticker (for curved surface), 2x3M sticker (for straight surface)

Attention

The magnetic suction adapter frame and steering adapter frame contain magnets, which do not support high-intensity movement, jumping or violent rotation

When moving, the camera may fall off. The sports adapter box can be used for high-intensity sports.

The 3M sticker cannot be reused.

Compatibility: Insta360 GO 2

Insta360 GO 2 steering bracket pet bag

Record life from the perspective of pets.

Free adjustment, soft and light.

Pet bag should be used with GO2 steering bracket.

image.png

*It is recommended to fix the elastic band on the pet strap or pet clothes to obtain a more stable shooting effect.

Free adjustment, soft fit

Non card hair Velcro with elastic band, suitable for various body shapes

image.png

No burden, easy shooting

Camera+steering bracket+pet bag, total weight is only 85g

image.png

Product parameters

Product name: Steering bracket pet bag

Material: pu leather+elastic Velcro

Color: black

Weight: single pet bag 31g

Length: The total length of the braid is about 51.5cm, the maximum use length is about 45cm, and the minimum use length is about 35cm.

Compatibility: GO2 steering bracket

Attention:

1. The length and weight of the product are measured by hand, and there may be some error (± 3cm/soil 3g).

2. When using, please ensure that the velcro of the pet bag of the steering bracket is pasted in place.

3. Pet bag can only be used with GO2 steering bracket, and it is incompatible with GO2 sports adapter box set.

4. When the steering bracket pet bag is used with GO2 steering bracket, because GO2 steering bracket contains magnets, it is not recommended to use it in high-intensity sports. The camera may fall off when jumping or turning violently.

Insta360 GO 2 ND Dimmer

Includes 1x ND8, 1x ND16, 1x ND32, 1x ND64 for Insta360 GO 2 lenses.

Installation method: Screw the dimmer lens onto the lens.

Includes 1x ND8, 1x ND16, 1x ND32, 1x ND64 for Insta360 GO 2 lenses.

Installation method: Screw the dimmer lens onto the lens.

image.png

Insta360 GO 2 USB adapter

This docking box can be connected to an external power supply to charge GO 2 during shooting.

Use the included Type-C USB cable to plug the docking box into the computer to view or transfer files.

Note: This adapter frame is not waterproof. Do not use it in wet environment or when it rains.

It includes a USB adapter, a Type-C charging wire and a manual.

undefined

undefined

undefined

undefined

undefined

Insta360 GO 2 Diving Shell

IPX8 is waterproof and supports 45m underwater diving.

Suitable for all kinds of water sports.

image.png

IPX8 is waterproof and supports 45m underwater diving

Suitable for all kinds of water sports

image.png

instructions

1. Open the diving shell

Push the lock bolt â‘  in the direction shown in the figure, and remove the buckle â‘¡ after unlocking

image.png

2. Place the anti fog piece

Put the anti fog piece into the buckle of the rear door of the waterproof shell, and ensure that the anti fog piece is embedded in the diving shell as shown in the figure.

image.png

Anti-fog sheet

Attention:

1) When placing the anti-fog sheet, please put the anti-fog sheet into the back door snap of the waterproof case.

2) If you purchase a third party anti-fog sheet, please make sure the size of the anti-fog sheet is less than or equal to 20*20*0.5mm.

If the size of the anti-fog sheet is too large, it will lead to poor sealing of the diving case and damage the camera.

3. Put in the camera

image.png

Caution:

1) When placing the camera, please be careful not to scratch the lens.

4. Close the diving case

Close the diving case, lock the waterproof case latch hook to the lug, and then press the latch until it clicks.

image.png

Caution:

1) Check carefully that the dive housing is securely closed and make sure that the seal and its contact surface are free of dirt or dust.

2) For best shooting results, keep the diving housing lens clean when using.

Specification:

Maximum waterproof depth:45m

Included items: Insta360 GO2 diving case, anti-fog sheet, portable storage bag, instructions for use & warranty (this document)

Weight: 131g

Insta360 GO 2 Charging Case

Long-lasting battery life, shoot while charging.

Remote control, shooting at your own pace.

Single hand hold, easy selfie.

This charging case is not waterproof.

Note: Both GO 2 include 1x charging case. You can purchase an additional case here.

Includes 1 x GO 2 charging case.

image.png

Long-lasting battery life, shooting while charging

* Camera with charging: box cumulative battery life of up to 150 minutes

Bluetooth remote control

Remote control, shooting at your own pace

image.png

Mini Tripod

Spread the "wings", stable placement

image.png

Handheld Selfie

Place the G02 in the charging case and hold it in one hand for easy selfies

image.png

Parameters

Material: plastic

Weight: 63.5g

Operating environment: -10°C to 40°C

Charging method: Type-C (need to use the standard USB Type A to Type C data charging cable to charge)

Charging time: 47 minutes to 80%, 65 minutes to 100% (5V 2A)

Charging case size: Expanded: 132.5mm x 26.0mm x 266mm

Closed: 68.1mm x 48.54mm x 26.5mm

Charging box display language: Chinese, English, Japanese

Caution

1. The charging case is not waterproof. If you have used the GO2 underwater, please make sure to dry the body of the GO2 and leave it for a period of time to ensure that the surface of the GO2 is completely dry. Make sure the water on the surface of the GO2 is completely dry before using it in the charging case.

2. The charging case has a standard 1/4 screw hole, so it can be used with a selfie stick, but it is not recommended to use it in strenuous sports. It can be used with a selfie stick, but it is not recommended to use it under strenuous sports scenes.

3. When connecting to a computer for data transfer, it is recommended to use the official standard USB Type A to Type C data cable to connect the charging case and the camera (the charging case needs to be opened), otherwise it may not be able to connect due to compatibility problems. Otherwise, it may not be connected due to compatibility problems.

4. One camera can only match one charging case, please match the charging case and camera again when switching to a new charging case.

Matching method:

â‘  Turn off the camera and put it in the charging case;

â‘¡Close the charging case and open it again, then press and hold the button on the camera for 2 seconds to turn on the camera.

Insta360 GO 2 case protector

Abrasion and scratch resistant for daily protection of your GO 2 charging case.

Easy to install and convenient to carry.

Using this case will make the tripod form of the charging case unusable.

Contains: 1x case protector.

image.png

image.png

Instructions for use

1. Tear off the adhesive paper on the internal adhesive strip of the protective sleeve.

2. Put the upper and lower shells of the protective case on the charging case, make sure the charging case is empty for the adapter position, and use the TypeC charging port on the charging case with the screw port aligned with the position on the protective case.

image.pngimage.png

Additional information

Weight N/A
Style

Lens protection, Magnetic lanyard, Simple clip, Steering support bracket, Storage bag, Conversion frame package, Steering bracket pet bagging, ND reducer, USB adapter enclosure, Diving shell, Charging case, Charging case protector

Be the first to review “Insta360 GO 2 Lens Protection Mirror Magnetic Suction Lanyard Simple Clip Steering Bracket Storage Package Original Accessories”

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

See It Styled On Instagram

    No access token

Main Menu